do not scale from this print "a" .010 ref 0.254 (-lc width) .055 1.40 ((no of positions x .0315[.800]) + .0975[2.477]) .003[.08] 2 max sway (any direction) "a" "a" -lc: locking clip option lc-08-tm-01 bte-xxx-xx-d fig. 1 bte-060-01-x-d-lc shown ((no of positions x .0315[.800]) +.1575[4.000]) ref .2350 5.969 ref .1550 ref 3.937 .0080 ref 0.203 ((no of positions -1) x .0315[.800]) .003[.08] .0945 2.400 c3 01 02 af af bte-xxx-xx-x-d-xx no of positions -020, -040, -060, -080 -100, -120 *-090 (per row) *-03 body style only row specification -d: double (use bte-xxx-xx-d-x & bteh-xxx-xx-d-x) option -a: alignment pins (use bte-xxx-xx-d-a) -lc: locking clips (use lc-08-tm-01) -k: polyamide film (n/a on styles -07 & -08) (use k-500-300, see fig. 2) -tr: tape & reel (80 pos max) [n/a on style -05, -06, -07 & -08] -fl: friction lock (see fig. 4, sheet 3) (use bte-xxx-01-d-x-fl) (avail on lead style -01 only, -020 thru -100 positions only) plating specification -f: flash selective gold with matte tin tails (use t-1sxx-xx-f) (see note 10) -l: light selective gold with matte tin tails (use t-1sxx-xx-l) (see note 10) -h: heavy gold (use t-1sxx-xx-h) -c: electro-polished selective (use t-1sxx-xx-c) body style -01: .1680[4.267] -02: .2861[7.264] -03: .4042[1.123] -04: .6010[15.265] -05: .7190[18.263] -06: .8370[21.260] -07: .9542 [24.237] -08: 1.1511[29.238] -09: .5224 [13.269] .037 ref 0.94 .280 ref 7.11 "b" .0375 0.953 see table 2 section "a"-"a" c1 c2 .003[.08] .001[.03] (see note 8) t-1s39-xx-x .0350 dia ref 0.889 ((no of positions x .0315[.800]) + .0975[2.477]) ref .0375 ref 0.952 -a: alignment pin option bte-xxx-xx-d-a .0375 ref 0.953 c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .8mm double row terminal assembly by: bte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 03/22/1999 3 1 sheet scale: 1.5:1 insulator: lcp, color: black terminal: phos bronze f:\dwg\misc\mktg\bte-xxx-xx-x-d-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. note deleted. 3. burr allowance: .0015[.038] max. 4. note deleted. 5. minimum pushout force: 6 oz. 6. note deleted. 7. parts to be mold to position. 8. max variance of .002[.05]. 9. bte-xxx-03-d body can be substituted for bte-xxx-03-d-a. 10. -l plating can be substituted for -f plating. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision af
tube: pt-1-24-01-78 plug: tp-07 packaging view [styles -01, -02 & -03] [parts to have position #1 loaded in same direction as arrow] [-05 leadstyle parts with kapton to be loaded with kapton resting on the tube ribs]. (no of positions x .0315[.800] + .1575[4.000] ref .275 6.99 ({(no of positions x .0315 [.800] + .1575 [4.000]) -.275 [6.99] }/ 2) .020[.51] .02 0.5 fig. 2 -k: polyamide film pad [use k-500-300] "r" tube: pt-1-24-01-98 plug: tp-26 [styles -04, -05 & -09] tube: pt-1-24-01-105 plug: tp-26 [style -06] [style -07] [style -08] tube: pt-1-24-01-104 plug: tp-26 tube: pt-1-24-02-104 plug: tp-26 sheet of .8mm double row terminal assembly by: bte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 03/22/1999 3 2 sheet scale: 2:1 revision af f:\dwg\misc\mktg\bte-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.2781 ref 7.064 .055 1.40 "b" "b" -lc: locking clip option fig. 3 bte-060-06-x-d-lc shown [different as shown, otherwise same as fig. 1] bte-xxx-02-d-a (see note 9, sheet 1) bteh-xxx-xx-d 02 01 -a: alignment pin option [style -04, -05, -06, -07, -08 & -09] bte-xxx-xx-d-a bteh-xxx-xx-d-a .0525 ref 1.334 r "c" (see note 8, sheet 1) .037 ref 0.94 .281 ref 7.14 .0525 1.334 ref section "b"-"b" .003[.08] .001[.03] c4 c5 t-1s51-xx-x see table 2, sheet 1 .2650 6.731 ref ((no of positions x .0315[.800]) +.1575[4.000]) ref -fl option bte-020-01-x-d-a-fl shown (available on -01 lead style only, -020 thru -100 positions only) [different as shown, otherwise same as fig. 1] fig. 4 .012 0.30 ref .008 0.20 ref .015 0.381 ref bte-xxx-01-d-x-fl sheet of .8mm double row terminal assembly by: bte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 03/22/1999 3 3 sheet scale: 1.5:1 revision af f:\dwg\misc\mktg\bte-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
